Working with Small Sample Volumes or Low Start Cell Numbers Using the Purple EasySep™ and EasyPlate™ EasySep™ Platforms

When performing cell separation procedures, it is sometimes necessary to work with small sample volumes or low cell numbers. In these situations, there are several tips for improving cell recovery and overall performance of the isolation procedure.

Our is designed for processing a small number of cells (for the minimum and maximum number of cells per well, please refer to the EasyPlate™ Product Information Sheet (PIS) of the kit you are using), and serves as an excellent alternative to the handheld Purple when performing small volume or low cell number separations. The EasyPlate™ magnet is designed to hold a round bottom, non-tissue culture-treated 96-well plate (e.g. Costar, Catalog #3788). The EasyPlate™ magnet is compatible with selected EasySep™ Enrichment Kits (refer to the webpage of the kit of interest).

After the magnetic separation step, carefully pour off the supernatant in one slow continuous motion. Leave the magnet and tube in the inverted position for 2 - 3 seconds, then return to the upright position. Do not shake or blot off any drops that may remain hanging from the mouth of the tube. Please view this of the proper pour-off technique.

For an overview on using the EasyPlate™ magnet please see . As well, please refer to these additional tips for successful isolation of enriched cells using the :

  • Ensure the 96-well plate sits securely on the EasyPlate™ magnet when removing the supernatant containing the enriched cells.
  • Carefully tilt the plate and magnet together at a 45° angle when removing the supernatant to avoid disturbance of the particles and unwanted cells at the bottom of the well.
  • Carefully pipette the enriched cell suspension from each well into a new 96-well plate. Do not pour. The magnetically labeled unwanted cells will remain bound to the bottom of the original well, held by the magnetic field of the EasyPlate™ magnet. The negatively selected, enriched cells in the new 96-well plate are now ready for use.

When using the Purple with small volumes or low cell numbers, the following recommendations can help to make your cell separation procedure more successful:

  • Always be sure to know the minimum number of total nucleated cells that can be reliably processed with the particular EasySep™ kit (refer to PIS for minimum capacity). However, if starting with less than the recommended minimum volume of cells, top up the initial sample with the recommended buffer to the minimum volume as stated in the PIS.
  • If starting with frozen cells, be sure to add DNAse I (Catalog #07900) to your sample.
  • After the magnetic separation step, carefully pour off the supernatant in one slow continuous motion. Leave the magnet and tube in the inverted position for 2 - 3 seconds, then return to the upright position. Do not shake or blot off any drops that may remain hanging from the mouth of the tube. Please view this of the proper pour-off technique.

Note: It is highly recommended to analyze a small amount of cells from the starting (pre-separation) fraction by FACS to determine the % purity of your cells of interest in the start sample population. This information is required for calculating cell recovery post-separation. on assessing your starting sample and calculating recovery.

Please contact techsupport@stemcell.com for further information on our EasyPlate™ EasySep™ Magnet protocols and compatible EasySep™ kits.



Related Resources

Isolation of CD4+ T cells

Evaluation Criteria for Cell Separation Methods

See which parameters to consider when choosing the right cell isolation method for your research.

View More Parameters >

Choosing a Cell Separation Method that Meets Your Research Needs

Learn more about the cell separation methods outlined above to choose the best method for your application.

Compare Methods >

Contact STEMCELL Technologies

Our Customer Service, Sales, and Product and Scientific Support departments in North America are available between 6 am and 5 pm Pacific Time (9 am and 8 pm Eastern Time). One of our representatives will be happy to help you by telephone or email. Please complete the form to contact us by email. A representative will get back to you shortly.
  •  

StemCell Technologies Inc. and affiliates ("STEMCELL Technologies") does not share your email address with third parties. StemCell Technologies Inc. will use your email address to confirm your identity and send you newsletters, transaction-related emails, promotional and customer service emails in accordance with our privacy policy. You can change your email preferences at any time.